CSB XHRL12650W 12V 650W Valve-Regulated Sealed Lead-Acid Battery
The CSB XHRL12650W is a 12V valve-regulated sealed lead-acid battery belonging to the XHRL series, primarily designed for high-rate float standby requirements such as data center UPS. The nominal capacity is 650W @ 15-minute rate, with 5-minute power of 1054.83 W/cell and 15-minute power of 651.83 W/cell. The battery utilizes AGM technology with gas recombination efficiency up to 99% and is maintenance-free. Design float life can reach 10 years under 25°C standby conditions; according to Eurobat standards, it can exceed 12 years at 20°C. The case material is PP, with a flame-retardant version also available. Terminals are I2 threaded lead alloy terminals, compatible with M6 bolts.
Taobao store
WeChat procurement
Product Features
- VRLA (Valve Regulated Lead Acid) Battery
- AGM (Absorbent Glass Mat) technology, maintenance-free, with up to 99% gas recombination efficiency
- Pure lead construction with proprietary formulation elements
- Purpose-built for high-rate UPS and float standby power applications
- Manufactured in accordance with IEC 60896-21/22:2004 and certified to UL1989 (MH14533)
Application Scenarios
- Data Center UPS Backup: Suitable for very large-scale scenarios
- High-Performance Computing Centers: Standby power configuration
- Cloud Data Centers: UPS uninterruptible protection
- Financial Data Centers: uninterruptible power supply
- Telecom Hubs: High-rate discharge backup support
- Industrial UPS: High-power backup solution
Product parameters
- Model:XHRL12650W
- Voltage:12 Vdc
- Nominal Capacity:650W @ 15min-rate
- Watts per Cell:1054.83 (5-Min 1.67 VPC @ 25°)
- Watts per Cell:651.83 (15-Min 1.67 VPC @ 25°)
- Max. Charge Current:65.00 A
- Max. Discharge Current:1350 (5sec)
- Short Circuit Current:4018 A
- Internal Resistance:2.33 mΩ
- Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
- Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
- Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
- Weight:47.90 / 105.57 kg / lb.
- Length (L):343.0±2.5 / 13.50±0.10 mm / in
- Width (W):170.0±2.0 / 6.69±0.0 mm / in
- Height (H):275.7±2.5 / 10.85±0.10 mm / in
- Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): 12+ years, Very Long Life
- Float Charging Voltage:13.5 - 13.8 Vdc/battery
- Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
- Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
The CSB XHRL12650W is a 12V valve-regulated sealed lead-acid battery belonging to the XHRL series, which is a high-performance variant of the HRL series, providing higher high-rate output for UPS and data center requirements. The battery uses Absorbent Glass Mat (AGM) technology with gas recombination efficiency up to 99% and a maintenance-free design. Its nominal capacity is 650W @ 15-minute rate (10.02V per PCS @ 25°C), with power of 1054.83 W/cell at 5-minute rate (1.67 VPC @ 25°C) and 651.83 W/cell at 15-minute rate.
In terms of electrical parameters, the battery's maximum charge current is 65.00 A, maximum discharge current is 1350 A (5 seconds), short-circuit current is 4018 A, and internal resistance is 2.33 mΩ. Float voltage is 13.5 - 13.8 Vdc/battery (25°C), and equalize voltage is 14.4 - 15.0 Vdc/battery (25°C). The battery has a low self-discharge rate, retaining more than 90% capacity after 90 days of storage at 25°C, and can be stored for up to 6 months; storage time can be extended with equalization charging every 10 months. It must be fully charged before use, and if storage temperature exceeds 25°C, the charging interval should be shortened.
The battery design life can reach 10 years under 25°C standby service, and complies with Eurobat standards (20°C) for an ultra-long life of over 12 years. Operating temperature range: nominal 25°C, discharge -15°C to 50°C, charge/storage -15°C to 40°C. Case material is PP (UL 94-HB), with a flame-retardant version (94-V0) available upon request. Terminals are I2 threaded lead alloy terminals, accepting M6 bolts, with terminal torque of 51.7±10.3 Kgf·cm (44.9±9.0 Lbf·in or 5.1±1.0 N·m).
Battery dimensions are length 343.0±2.5 mm, width 170.0±2.0 mm, height 275.7±2.5 mm, and weight 47.90 kg (105.57 lb). This battery is specifically designed for high-rate UPS and float standby power applications, complies with IEC 60896-21/22:2004 standards, and is recognized under UL1989 (MH14533). Its pure lead construction and proprietary elements ensure reliability and performance.