Product Features

  • Valve-regulated lead-acid (VRLA) design
  • Absorbent glass mat (AGM) technology, maintenance-free, with up to 99% gas recombination efficiency
  • Pure lead plates with proprietary formulation elements
  • Suitable for float standby power applications
  • Manufactured to IEC 61056-1/2:2012, UL1989 certified (MH14533)

Application Scenarios

  • Backup power for alarm control panels
  • Exit signs and emergency lighting fixtures
  • Backup power for infusion pumps and patient monitors
  • Building intercom and access control systems
  • Fire alarm control panels and alarm devices
  • Test equipment and small electronic instruments

Product parameters

  • Model:GPL1272
  • Voltage:12 Vdc
  • Nominal Capacity:7.2 Ah @20hr-rate
  • Ah Capacity:6.80 (8-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:7.32 (20-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:6.57 (8-Hr 1.80 VPC @ 25°C)
  • Max. Charge Current:2.16 A
  • Max. Discharge Current:130 A
  • Short Circuit Current:265 A
  • Internal Resistance:22.0 mΩ
  • Terminal Type:F2 terminal (Faston Tab 250)
  • Container Material:ABS (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:2.60 / 5.73 kg / lb.
  • Length (L):150.9±2.0 / 5.94±0.08 mm / in
  • Width (W):64.8±1.0 / 2.55±0.04 mm / in
  • Height (H):98.6±1.0 / 3.88±0.04 mm / in
  • Design Life:Up to 8 years in standby service at 25°C; Eurobat (20°C): 10/12 years, Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C
  • Note:F1 terminal is available; Max Discharge Current = 100 A (5 sec.)

Product details

The GPL series includes a 12V top-terminal valve-regulated sealed lead-acid battery—the CSB GPL1272. It is officially defined as a general-purpose product and is also the longer-life version of the GP series, primarily targeting general standby power applications and offering a longer service life. Its nominal capacity is 7.2Ah (test conditions: 20-hour rate, 1.75VPC, 25°C); measured at the 8-hour rate, 1.75VPC, 25°C, the capacity is 6.80Ah; at the 20-hour rate, 1.75VPC, 25°C it is 7.32Ah; and at the 8-hour rate, 1.80VPC, 25°C it is 6.57Ah. In terms of electrical parameters, the GPL1272 can withstand a maximum charge current of 2.16A and a discharge current of 130A, with a short-circuit current of 265A and an internal resistance of 22.0mΩ. The float charge voltage is set at 13.5 to 13.8Vdc (25°C), and the equalization charge voltage is 14.4 to 15.0Vdc (25°C). Self-discharge performance: after 90 days at 25°C, the remaining capacity is still above 90%; it can be stored at 25°C for up to 6 months, but must be fully charged before use. If the storage temperature exceeds 25°C, the recharge interval should be shortened accordingly. This battery uses a valve-regulated sealed lead-acid design and absorbed glass mat (AGM) technology, with a gas recombination efficiency of up to 99%, and requires no maintenance. Its pure lead construction, proprietary formulation components, and design specifically for float standby power applications constitute its core technical features. The product is manufactured in accordance with IEC 61056-1/2:2012 and is UL1989 recognized (MH14533). The case material is ABS (UL 94-HB); a flame-retardant version (94-V0) is available upon request. In terms of dimensions and weight, the GPL1272 is 150.9±2.0mm long, 64.8±1.0mm wide, and 98.6±1.0mm high, weighing 2.60kg (5.73 lb). The terminal uses an F2 Faston Tab 250. Operating temperature range: nominal temperature 25°C (77°F); discharge can be performed from -15°C to 50°C (5°F to 122°F), while charging and storage are between -15°C and 40°C (5°F to 104°F). Regarding design life, under float standby service at 25°C, the GPL1272 can reach 8 years; when compliant with the Eurobat (20°C) standard, it offers a long life of 10/12 years. Based on the above capacity, dimensions, and float charge characteristics, this model is suitable for general-purpose float standby power scenarios. It can perform discharge, charging, and storage at the nominal temperature of 25°C and within the specified temperature range, meeting the basic requirements of corresponding standby power systems for a 12V battery.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...